Heat-resistant steel cord conveyor belts
When the temperature of the conveyed material exceeds 60 °C, it is more economical to switch to heat-resistant steel cord belts. Heat damages an ordinary belt: the cover rubber cracks, wrinkles or softens, and the plies can separate from each other or from the rubber.
Heat-resistant steel cord conveyor belts carry sinter, pellets, chemicals, fertilisers and other hot materials.
The carcass is made of polyamide/polyester (EP), polyester/polyester (EE) or polyamide/polyamide (PP) plies.
Fields of application
Mining and quarrying
Chemical industry
Oil and gas industry
Cover properties
- Abrasion resistance
- Cut resistance
- Tear resistance
- Antistatic
| Technical characteristics | DIN | RR (N/mm) | AR (%) | U (mm3) |
|---|---|---|---|---|
| Conveyor belts for light-duty conditions. | z | 150 | 350 | 250 |
| Standard quality for normal operating conditions. | y | 200 | 400 | 150 |
| Very good tear resistance for heavy-duty operation. | x | 250 | 450 | 120 |
| Their very good abrasion resistance makes these belts ideal for highly abrasive materials. | w | 180 | 400 | 90 |
Conveying incline
The top cover of a conveyor belt can be smooth or profiled, depending on the material conveyed and the incline of the conveyor.
- Smooth or patterned belts0–30°
Smooth belts are used for all kinds of processed or bulk material conveyed at an incline of up to 18–20°.
For inclines between 20 and 30°, patterned belts are recommended.
- Chevron belts30–65°
The rubber cleats moulded on the belt surface prevent or reduce slipping and increase the amount conveyed. Suitable for processed or bulk material that does not stick to rubber.
- Sidewall and cleated belts65–80°
These belts can have cleats only (no sidewalls) or cleats and sidewalls, which stop the material falling off the sides of the belt. They carry processed or bulk material while increasing the volume conveyed.
- Bucket belts90°
A special type of belt, made by bolting metal or plastic buckets onto a smooth belt. Bucket belts are recommended for process lines with narrow working space and operations on several levels.
Available splice types
- Finger splice (zig-zag)
Meets every requirement for keeping an even thickness. A very flexible joint, needed especially on cleated belts. Recommended for belts with 1 or 2 plies.
- Stepped finger splice
Similar to the finger (zig-zag) splice and also suitable for heavy-duty operation. Recommended for belts with 2 or 3 plies.
- Bias (wedge) splice
A quick and simple splice for belts with many fabric plies.
- Step splice
Recommended for all textile ply belts with at least two plies.
Edge types
- Sealed (covered) edges
Recommended for belts thicker than 10 mm and for very humid or strongly corrosive environments.
- Cut edges
Recommended for thin belts of up to 10 mm and for dry or low-humidity environments.
Frequently asked questions
At what temperature do I need a heat-resistant belt?
When the conveyed material is hotter than 60 °C, a heat-resistant belt is the more economical choice. An ordinary belt deteriorates: the cover rubber cracks, wrinkles or softens.
What temperatures can these belts work at?
They are designed for 110–200 °C, in metallurgy, steelmaking and other industries with high working temperatures.
Which materials are they typically used for?
Sinter, pellets, chemicals, fertilisers and other hot materials.