Skip to content

General purpose textile ply conveyor belts

Stepped cut-away of a rubber conveyor belt with multi-ply textile reinforcement

A general purpose rubber conveyor belt can be used in any industry that moves materials. It consists of a textile carcass, which gives the belt its tensile strength, and rubber covers, which protect the carcass from the impact of the conveyed material by absorbing the shocks. The carcass has 2 to 6 plies of EP fabric (polyamide/polyester): rot-proof, moisture resistant, with low elongation and high tensile strength. These belts work at temperatures from -30 °C to +70 °C.

Guide price: from approx. 170 lei/m² + VAT

The exact price depends on size, quantity and make-up; we send it in our quote.

Fields of application

  • Agriculture
  • Mining and quarrying
  • Chemical industry
  • Building materials
  • Production lines
  • Waste recycling
  • Automotive industry

General characteristics

  • Available constructions: 250/2; 315/2; 400/3; 500/3; 500/4; 630/4; 800/4; 1000/4; 1250/5; 2000/6 (the first value is the belt breaking strength in N/mm, the second the number of plies);
  • Standard widths go up to 2000 mm; other widths are made on request;
  • Belt thickness from 4 to 30 mm;
  • Lengths from 10 to 300 m;
  • Elongation at reference load: 1–1.4%;
  • Longitudinal elongation at break: 14–18%.

Cover properties

  • Abrasion resistance
  • Cut resistance
  • Tear resistance
  • Antistatic

The covers protect the carcass. Their quality and profile depend on the material conveyed and the operating conditions.

Application DIN 22102 RR (N/mm) AR (%) U (mm3)
Recommended for light-duty conditions (loose, soft materials) z 150 350 250
Very good wear resistance in normal use (bulk or processed materials) y 200 400 150
Excellent wear resistance for severe conditions (hard, abrasive materials) x 250 450 120
Very good wear resistance in severe conditions caused by hard, sharp-edged material w 180 400 90

Conveying incline

The top cover of a conveyor belt can be smooth or profiled, depending on the material conveyed and the incline of the conveyor.

  • Smooth or patterned belts0–30°

    Smooth belts are used for all kinds of processed or bulk material conveyed at an incline of up to 18–20°. 

    For inclines between 20 and 30°, patterned belts are recommended.

  • Chevron belts30–65°

    The rubber cleats moulded on the belt surface prevent or reduce slipping and increase the amount conveyed. Suitable for processed or bulk material that does not stick to rubber.

  • Sidewall and cleated belts65–80°

    These belts can have cleats only (no sidewalls) or cleats and sidewalls, which stop the material falling off the sides of the belt. They carry processed or bulk material while increasing the volume conveyed.

  • Bucket belts90°

    A special type of belt, made by bolting metal or plastic buckets onto a smooth belt. Bucket belts are recommended for process lines with narrow working space and operations on several levels.

Available splice types

  • Finger splice (zig-zag)

    Meets every requirement for keeping an even thickness. A very flexible joint, needed especially on cleated belts. Recommended for belts with 1 or 2 plies.

  • Stepped finger splice

    Similar to the finger (zig-zag) splice and also suitable for heavy-duty operation. Recommended for belts with 2 or 3 plies.

  • Bias (wedge) splice

    A quick and simple splice for belts with many fabric plies.

  • Step splice

    Recommended for all textile ply belts with at least two plies.

Edge types

  • Sealed (covered) edges

    Recommended for belts thicker than 10 mm and for very humid or strongly corrosive environments.

  • Cut edges

    Recommended for thin belts of up to 10 mm and for dry or low-humidity environments.

Frequently asked questions

Where is a general-purpose conveyor belt used?

Wherever materials are conveyed: agriculture, mining and chemicals, building materials, production lines, recycling and the automotive industry.

What is the carcass made of?

Two to six plies of EP (polyamide-polyester) fabric that resists moisture, with low elongation and high tensile strength.

Which cover grades can I choose?

Z for light duty, Y for normal duty, W for abrasive materials and X for materials with hard, sharp edges (DIN 22102).

What temperatures can it work at?

From -30 °C to +70 °C. For hotter materials there are heat-resistant belts.