Skip to content

Oil-resistant steel cord conveyor belts

Stepped cut-away of a rubber conveyor belt with steel cord reinforcement, with an oil can symbol (oil-resistant)

These steel cord rubber conveyor belts are recommended when the conveyed material contains mineral or vegetable fats. Fats make the rubber of an ordinary belt swell, which degrades its physical and mechanical properties until it becomes brittle and unusable. ELASTIMPEX offers a wide range of oil-resistant steel cord belts to match the fat content of the material conveyed.

Fields of application

  • Mining and quarrying
  • Chemical industry

Cover properties

  • Abrasion resistance
  • Cut resistance
  • Tear resistance
  • Antistatic
Technical characteristics DIN RR (N/mm) AR (%) U (mm3)
Conveyor belts for light-duty conditions. z 150 350 250
Standard quality for normal operating conditions. y 200 400 150
Very good tear resistance for heavy-duty operation. x 250 450 120
Their very good abrasion resistance makes these belts ideal for highly abrasive materials. w 180 400 90

Conveying incline

The top cover of a conveyor belt can be smooth or profiled, depending on the material conveyed and the incline of the conveyor.

  • Smooth or patterned belts0–30°

    Smooth belts are used for all kinds of processed or bulk material conveyed at an incline of up to 18–20°. 

    For inclines between 20 and 30°, patterned belts are recommended.

  • Chevron belts30–65°

    The rubber cleats moulded on the belt surface prevent or reduce slipping and increase the amount conveyed. Suitable for processed or bulk material that does not stick to rubber.

  • Sidewall and cleated belts65–80°

    These belts can have cleats only (no sidewalls) or cleats and sidewalls, which stop the material falling off the sides of the belt. They carry processed or bulk material while increasing the volume conveyed.

  • Bucket belts90°

    A special type of belt, made by bolting metal or plastic buckets onto a smooth belt. Bucket belts are recommended for process lines with narrow working space and operations on several levels.

Available splice types

  • Finger splice (zig-zag)

    Meets every requirement for keeping an even thickness. A very flexible joint, needed especially on cleated belts. Recommended for belts with 1 or 2 plies.

  • Stepped finger splice

    Similar to the finger (zig-zag) splice and also suitable for heavy-duty operation. Recommended for belts with 2 or 3 plies.

  • Bias (wedge) splice

    A quick and simple splice for belts with many fabric plies.

  • Step splice

    Recommended for all textile ply belts with at least two plies.

Edge types

  • Sealed (covered) edges

    Recommended for belts thicker than 10 mm and for very humid or strongly corrosive environments.

  • Cut edges

    Recommended for thin belts of up to 10 mm and for dry or low-humidity environments.

Frequently asked questions

Why do I need an oil-resistant belt?

Mineral or vegetable oils and fats make the rubber of an ordinary belt swell. The belt loses its physical and mechanical properties and can become brittle and unusable.

How do I choose the right grade?

By the fat or oil content of the conveyed material. Tell us the type of material, the type of oil or fat, its concentration and the material’s temperature during transport.

Which industries use them?

Mainly mining and quarrying and the chemical industry, on long conveyors that need the strength of a steel cord carcass.