Skip to content

Heat-resistant textile ply conveyor belts

Stepped cut-away of a rubber conveyor belt with multi-ply textile reinforcement, with a thermometer symbol (heat-resistant)

These textile ply rubber conveyor belts are designed to work at 110 °C – 200 °C. They suit metallurgy, steelmaking and other applications with high operating temperatures, where the thickness of the rubber covers and the quality of the compound largely decide the service life of the belt.

Guide price: from approx. 740 lei/m² + VAT

The exact price depends on size, quantity and make-up; we send it in our quote.

Fields of application

  • Mining and quarrying
  • Chemical industry
  • Waste recycling

General characteristics

  • Available constructions: 250/2; 315/2; 400/3; 500/3; 500/4; 630/4; 800/4; 1000/4; 1250/5; 2000/6 (the first value is the belt breaking strength in N/mm, the second the number of plies);
  • Standard widths go up to 2000 mm; other widths are made on request;
  • Belt thickness from 4 to 30 mm;
  • Lengths from 10 to 300 m;
  • Elongation at reference load: 1–1.4%;
  • Longitudinal elongation at break: 14–18%.

Cover properties

  • Abrasion resistance
  • Heat resistance
  • Tear resistance
  • Antistatic
Type Fields of application Compound Operating temp. RR (N/m) AR (%) u (mm3)
ST1 Good resistance for materials that leave the installation at lower temperatures styrene-butadiene rubber 110 - 130°C 100 350 200
ST2 Very good heat resistance for materials whose temperature can be controlled ethylene-propylene-diene rubber 130 - 150°C 100 350 200
ST3 Very good heat resistance with abrasive materials that can reach 250 °C 100% ethylene-propylene rubber 150 - 200°C 120 350 250
Material conveyed Size Material temperature Belt surface temperature
Sinter 25 - 200 mm 200 - 400 ̊C 130 - 150 ̊C
Return sinter < 10 mm 260 ̊C 150 - 190 ̊C
Coke 100 - 200 mm 70 - 100 ̊C 50 - 60 ̊C
Raw materials < 30 mm 180 - 220 ̊C 100 - 120 ̊C
Slag 10 - 30 mm 100 - 220 ̊C 100 - 110 ̊C
Cement Powder 100 - 125 ̊C 80 - 90 ̊C
Metal powder - 170 ̊C 120 - 130 ̊C
Sand moulds - 200 - 250 ̊C 80 - 90 ̊C

Conveying incline

The top cover of a conveyor belt can be smooth or profiled, depending on the material conveyed and the incline of the conveyor.

  • Smooth or patterned belts0–30°

    Smooth belts are used for all kinds of processed or bulk material conveyed at an incline of up to 18–20°. 

    For inclines between 20 and 30°, patterned belts are recommended.

  • Chevron belts30–65°

    The rubber cleats moulded on the belt surface prevent or reduce slipping and increase the amount conveyed. Suitable for processed or bulk material that does not stick to rubber.

  • Sidewall and cleated belts65–80°

    These belts can have cleats only (no sidewalls) or cleats and sidewalls, which stop the material falling off the sides of the belt. They carry processed or bulk material while increasing the volume conveyed.

  • Bucket belts90°

    A special type of belt, made by bolting metal or plastic buckets onto a smooth belt. Bucket belts are recommended for process lines with narrow working space and operations on several levels.

Available splice types

  • Finger splice (zig-zag)

    Meets every requirement for keeping an even thickness. A very flexible joint, needed especially on cleated belts. Recommended for belts with 1 or 2 plies.

  • Stepped finger splice

    Similar to the finger (zig-zag) splice and also suitable for heavy-duty operation. Recommended for belts with 2 or 3 plies.

  • Bias (wedge) splice

    A quick and simple splice for belts with many fabric plies.

  • Step splice

    Recommended for all textile ply belts with at least two plies.

Edge types

  • Sealed (covered) edges

    Recommended for belts thicker than 10 mm and for very humid or strongly corrosive environments.

  • Cut edges

    Recommended for thin belts of up to 10 mm and for dry or low-humidity environments.

Frequently asked questions

Which heat-resistant grades are there?

ST1, styrene-butadiene rubber, for 110–130 °C; ST2, EPDM rubber, for 130–150 °C; and ST3, EPM rubber, for 150–200 °C and abrasive materials that can reach 250 °C.

Which sizes can you make?

Constructions from 250/2 to 2000/6, standard widths up to 2000 mm (wider on request), thicknesses of 4–30 mm and lengths of 10–300 m.

What determines the belt’s service life?

Mainly the thickness of the rubber covers and the quality of the rubber compound.